CHAIN KNOCKERS

CHAIN KNOCKERS

 

Depending on the size of the tool, it has one to three chains with solid carbide inserts brazed on the chainlinks. Because of the inserts, which make the tool so special, the pipe is cleaned out of rust and dirt very effectively. There are two different types of connections to the rotating wire. The wire can be put through the tool and tightened using allen screws or it can be connected using t-slot connectors.

PRODUCT CARDS

BRUSHES

BRUSHES

 

Brushes are good for example to clean plastic pipes, where the use of the chain knocker is too heavy. Brushes are also suitable for spreading the paste in the spraylining method and also to center different kinds of tools in the pipe, like drills etc. High-quality strings are made of nylon. We have also NYLON/STEEL brushes which are especially designed for cleaning plastic pipes.

If you are seeking A CUSTOM BRUSH designed to your needs, you can order them from us. Our minimum custom brush order is 10 brushes.

SECURING RINGS

The securing ring is used to prevent a drop of the brush from the cable during the cleaning.

PRODUCT CARDS

CUTTERS

CUTTERS

 

Cutters are used in different operations of relining process.

For example RLC-100 is used to open the lateral connection

in 100 mm pipe. If you overshoot a liner in 4” pipe, you can easily cut off the excess liner with our Overshot Pipe Cutter.

PRODUCT CARDS

CABLE CONNECTORS

CABLE CONNECTORS

 

Cable connectors can connect centering axel or another cable to your cable.

CENTERING AXELS

CENTERING AXELS

 

Centering Axels are used to centralize different Renssi® Tools to get the best result for your job. Suitable tools are for example RCD and RLC tools. Centering Axel has high quality ballbearings inside to make it rotate well.

PRODUCT CARDS

SANDPAPER HOLDERS

SANDPAPER HOLDERS

 

RSP is a sandpaper grinder, with four sandpapers attached to it’s body. After cutting a lateral, you can finish the job with it. Use this with different size sandpapers, to match the pipe you are working with. You can purchase suitable sandpapers from us.

PRODUCT CARDS

CABLES

CABLES

 

There are two types of cables that we are offering to our customer; Cross Layer and Spring Layer cable.

You have an option to choose ready-to-use TC- and TS-cables, which includes a cover, cable and T-slide adapters and/or a sleeve, or you can also order cables and covers separately.

PRODUCT CARDS

ADAPTERS & ACCESSORIES

ADAPTERS & ACCESSORIES

 

In this category you can find adapters to connect Renssi® Tools with your gear. There are also available many kinds of other accessories which you can use with your Renssi® Tools. With the definition code, you can easily define what kind of and which size adapter you need.

PRODUCT CARDS

PRESS

PRESS

 

Epoxy spreads smoothly on the liner with Renssi® Press. Smoothly spread epoxy on the surfaces of the liner ables successful relining, which repairs pipe’s surface damages and protects the pipe being damaged for a long time.

MODELS

 

RP-325 325 mm wide, up to Ø 200mm liner

RP-475 475 mm wide, up to Ø 300mm liner

PRODUCT CARDS

ADJUSTABLE CLUTCH

ADJUSTABLE CLUTCH

 

The clutch CTL-001 is used as an accessory for a drill when rotating a cable with a chain knocker on it. The clutch prevents the cable of breaking down and also personal injuries, if the tool gets stuck in the pipe while rotating. Adjustable clutch has a wide range of spareparts.

PRODUCT CARDS

INVERSION DRUMS & DRUM HEADS

INVERSION DRUMS & DRUM HEADS

 

Inversion Drums are used in the pipe relining.

Pneumatic features of the inversion drum shoot the liner smoothly into a pipe which is important in achieving a successful result. Inversion Drum Model RID-400 is a hybrid, which means that you can attach this model into an accesory bracket RID-400-BR by removing it from its cart. This ability is not available in other models.

MODELS

 

RID-300, RID-400, RID-600, RID-800

DRUM HEADS

 

DRUM HEADS with 4” thread attachment, with 6” thread attachment and Storz adapters

PRODUCT CARDS

RENSSI MACHINE

RENSSI® MACHINE

 

RENSSI® RCM-10 Machine comes as a default with a 230V, 1300W Bosch 21-2-RCT drill, Renssi CLT-001 clutch and 10 meters of 10mm cable. It can also be bought without the drill, if you want to install a drill with a different voltage.

Two larger models, RCM-25 and RCM-36 have a 1.5kW electric motor which is controlled by a separate unit and they can be operated with 230V or 110V.

You can connect Renssi® chainscrapers, brushes and cutters to these machines, depending on your current job..

PRODUCT CARDS

MADE IN FINLAND

Copyright 2017 Renssi Finland Oy

Website by Onnimainos

MADE IN FINLAND

Copyright 2017 Renssi Finland Oy

Website by Onnimainos